Transparent LED Bulb – Edison ST64 Long Filament 7W E27 Vintage Decorative Dimmable 2200K

10,81 

10,81 

En stock

Shopping Cart

No products in the cart.

Transparent LED Bulb – Edison ST64 Long Filament 7W E27 Vintage Decorative Dimmable 2200K

10,81 

Here is an ecological and beautiful LED bulb! Its curved filaments give it a vintage look, to perfect your interior decoration in every detail, without compromising on the quality of your lighting. It emits a warm light for an intimate atmosphere, just like traditional 40-45 W bulbs, but with lower power consumption and a longer lifespan.

This light bulb is dimmable: you can adjust its brightness to perfectly adapt it to the room in which you install it and to the desired atmosphere.

A few tips to help you choose the right dimmer :

  • It is essential to use a specific dimmer or a new-generation universal dimmer to dim this bulb.
  • Our dimmable bulbs with straight filaments are compatible with all dimmers (TRIA or IGBT), but bulbs with curved filaments should be used with IGBT dimmers.
  • In addition to the maximum power supported by the dimmer, it is strongly recommended to adjust the bulb according to the minimum power required: if the minimum wattage of the bulb is less than the basic value indicated on the dimmer, the device could flicker and/or be damaged.

En stock

Fait main
Paiement sécurisé

Data sheet:

  • Power consumption: 7W.
  • Brightness: 720 lumens.
  • Base: E27.
  • Energy class: F.
  • Width: 64mm.
  • Height: 145mm.
  • RA: >80.
  • Light beam: 360.
  • Maximal realization time light intensity: 0 seconds.
  • Color temperature: 2200K.

Our dimmable bulbs with straight filament are compatible with all dimmers (TRIA or IGBT), while those with curved filament should be used with IGBT dimmers.
Regarding the choice of the dimmer: in addition to the maximum power supported by the dimmer, it is strongly recommended to set the bulb also according to the minimum power required; if the minimum wattage of the bulb is lower than the basic value indicated on the dimmer, the device could flicker and/or be damaged.